Words Matter — Editing Text in AutoCAD: Tuesday Tips With Frank

Learning

By Frank Mayfield

It was a lesson I learned early in my career. The drafting checker had marked every instance of “GREY” in my drawing set to be changed to “GRAY”. It seems the Mil-Spec I was working under was quite specific about that. Now, these were in the good old days of board drafting, so I had to go through dozens of sheets finding and fixing my mistakes. Needless to say, this took a while.

Nowadays, similar errors are still made, but it’s a much easier task to correct them. In this post, I’ll show you two tools that are common in word processing apps, but often overlooked when editing text in AutoCAD. First, spell check.

The Spell Checker

You can find the “SPELL” command from the Text panel of the Annotate tab of the Ribbon (or you can also just type it in the Command Line). You’ll get the Check Spelling dialog box as shown below.

For the most part, it works as you would expect, but there are some subtle differences. Note that you have the option to check everything, just the current space/layout, or only selected objects. Click on the Settings button and you’ll get further control over what’s included in the check.

Editing Text in AutoCAD: Spell Check

One of the most powerful features here is the ability to create and update a custom dictionary. This is extremely valuable for industry specific terms that may not be found in the standard dictionary. If you’re in an office with other users, I suggest making a single custom dictionary in a shared network location so that as you or your teammates add new words to it, it will be available to everyone. You might want to contact your CAD Manager for a preferred location.

Find and Replace

Like your favorite word processor, you also have access to a powerful Find and Replace feature in AutoCAD. You can start it via the find text field in the Ribbon as I’ve highlighted above, or simply type FIND on the Command Line. Either way, you’ll get the following dialog box:

Editing Text in AutoCAD: Find and Replace

Like the spell checker, you can choose where you want to run the check. Also, there is a dialog expansion icon that will reveal additional search options and more controls on what kind of text objects are included.

Summing Up

Hey, we all make mistakes, but fixing misspellings or reoccurring errors before they’re issued can spare you or your company some unnecessary embarrassment. Make it a habit to use the tools available to you from within AutoCAD. Remember, it’s not all about the graphics in our drawings… words matter too.

More Tuesday Tips

Check out our whole TuesdayTipsseries for ideas on how to make AutoCAD work for you.

Try AutoCAD free for 30 days

Related Articles

Comments Closed

1 comment

  1. dooggins1@hotmail.com

    Hey im having issues with being able to explode arc aligned text without it changing the font or flipping the text all around. Can you help? im using autocad 2018

The AutoCAD Blog is all about helping you get the most out of AutoCAD. It's also the best way for you to connect with the makers of AutoCAD.

Subscribe to keep up with AutoCAD