For the Have You Tried this month, we’re going to focus on a couple of commands that you might not be using very often, STRETCH and LENGTHEN.
Have you ever needed to change the length of a line or arc after it was drawn? To do this, you might draw a temporary line, extend, or trim to it, and then erase the temporary line. Stretching and lengthening objects can help to reduce these steps.
In this new Have You Tried, we’ll cover how to:
- Stretch multiple objects
- Select objects with precision
- Lengthen objects
- Use grips to stretch and lengthen objects
Learn how to stretch and lengthen objects with the step-by-step examples in the Have You Tried: The Strength and Lengthen Commands topic.
Keep the Feedback Coming
Thanks for all the great feedback submitted so far. Because of the great feedback, we have been able to improve the topics in the AutoCAD Online Help system.
The best way to submit feedback is by using the “Was this helpful?” section located at the bottom of every Help topic. Let us know what you like or don’t like about a topic or provide suggestions for other subjects that you’d like to see covered in greater detail. The more specific your comments, the better.
There are no comments