Transition to a New Way to Change Views: Tuesday Tips With Frank

Learning
View Transitions in AutoCAD

As a veteran AutoCAD user (this year marks 36 years!) I always have a few settings I change whenever I open a new version for the first time. Among my usual suspects are PICKBOX, OSMODE, and CURSORSIZE. I’ll also open the Palettes I like and anchor them in my preferred positions, left or right.

But it occurred to me that while we vets know about such things, it stands to reason that newer users aren’t even aware that some of these controls exist. While writing my last post on Zoom Options, I was reminded of another System Variable that I always set right off the bat. It’s called VTENABLE, and it’s also the subject of today’s post.

What is VTENABLE?

Let’s break down the name. The VT part is short for View Transitions. Take those letters away and you have the word ENABLE. If you’re playing along at home, you’ve probably already figured out that it enables something called “view transitions.”

“OK, Frank,” you might be saying…“I get it, but what are view transitions?” To explain, let’s say you’re using Zoom Window, or more likely, Zoom Extents. You know how your drawing will shrink or expand as it goes from the first view to the second? Those are called View Transitions.

View Transitions On AutoCAD
Zooming with View Transitions ON

While they’re really cool, this dinosaur would prefer to have the new view display instantly. That’s where VTENABLE comes in. I don’t want to watch it zoom in or out, just give me the view! (I guess that little slice of time is precious at my age). Its default value is 3, but I set it to 0 (zero) to turn the whole thing off. Plus, it’s a registry setting so it stays set for any drawing I open.

Below is a chart of the possible values and what they do. It can be set anywhere between 0 and 7, but you’d have a hard time remembering what each setting controls (other than 0, which turns everything off).

VTENABLE Values AutoCAD

But here’s the good news. There’s a better way. AutoCAD has a companion command called VTOPTIONS. It’s not in the Ribbon anywhere, so you have to use the Command Line to run it. When you do, you’ll get the dialog box as seen below.

As you can see, the check boxes control the settings of the previous chart, and they in turn control the value of VTENABLE.

VTOPTIONS AutoCAD

There are even some handy sliders to control the Transition Speed (should you choose to use transitions) and the Performance, or the minimum frames per second of the transitions. These two sliders set the variables VTDURATION and VTFPS, respectively.

View Transitions Off AutoCAD
Zooming with View Transitions OFF

Wrapping Up

Pretty cool stuff, huh? I’d be willing to bet that most AutoCAD beginners aren’t aware of these settings. I’d also be willing to bet that at least some of them would like to just get to the next view instead of watching AutoCAD doing it. With the VTOPTIONS command, you can take control of how you get from view to view.

Oh, and in case you’re curious, I set PICKBOX up to 4, my OSMODE is 679, and yes, this old-timer prefers his CURSORSIZE at 100 – or full screen.

I also like to set WHIPPERSNAPPERMODE* mode to 0 which will keep those pesky kids off my lawn.

*Not a real AutoCAD variable

More Tuesday Tips

Check out our whole Tuesday Tips series for ideas on how to make AutoCAD work for you. Do you have any favorite AutoCAD tips? Tell us in the comments!



Frank Mayfield

Frank has worked in various design and CAD Management roles with AutoCAD and Autodesk software since 1986 (v2.62). He is currently a Design Technology Consultant in Tulsa, OK. He also serves as Vice President on the AUGI Board of Directors and is a member of numerous Autodesk user panels. As a top-rated mentor for trial users of AutoCAD 2018 and AutoCAD LT 2018, he has provided live, real-time guidance and support for over 2,500 new users in more than 50 countries worldwide. He currently serves on the AUGI Board of Directors and is a member of numerous Autodesk user panels.

Try AutoCAD free for 15 days
The AutoCAD Blog is all about helping you get the most out of AutoCAD. It's also the best way for you to connect with the makers of AutoCAD. Subscribe to keep up with AutoCAD

______
icon-svg-close-thick

Cookie preferences

Your privacy is important to us and so is an optimal experience. To help us customize information and build applications, we collect data about your use of this site.

May we collect and use your data?

Learn more about the Third Party Services we use and our Privacy Statement.

Strictly necessary – required for our site to work and to provide services to you

These cookies allow us to record your preferences or login information, respond to your requests or fulfill items in your shopping cart.

Improve your experience – allows us to show you what is relevant to you

These cookies enable us to provide enhanced functionality and personalization. They may be set by us or by third party providers whose services we use to deliver information and experiences tailored to you. If you do not allow these cookies, some or all of these services may not be available for you.

Customize your advertising – permits us to offer targeted advertising to you

These cookies collect data about you based on your activities and interests in order to show you relevant ads and to track effectiveness. By collecting this data, the ads you see will be more tailored to your interests. If you do not allow these cookies, you will experience less targeted advertising.

icon-svg-close-thick

THIRD PARTY SERVICES

Learn more about the Third-Party Services we use in each category, and how we use the data we collect from you online.

icon-svg-hide-thick

icon-svg-show-thick

Strictly necessary – required for our site to work and to provide services to you

Qualtrics
W
Akamai mPulse
W
Digital River
W
Dynatrace
W
Khoros
W
Launch Darkly
W
New Relic
W
Salesforce Live Agent
W
Wistia
W
Tealium
W
Upsellit
W
CJ Affiliates
W
Commission Factory
W
Google Analytics (Strictly Necessary)
W
Typepad Stats
W
Geo Targetly
W
SpeedCurve
W
Qualified
#

icon-svg-hide-thick

icon-svg-show-thick

Improve your experience – allows us to show you what is relevant to you

Google Optimize
W
ClickTale
W
OneSignal
W
Optimizely
W
Amplitude
W
Snowplow
W
UserVoice
W
Clearbit
#
YouTube
#

icon-svg-hide-thick

icon-svg-show-thick

Customize your advertising – permits us to offer targeted advertising to you

Adobe Analytics
W
Google Analytics (Web Analytics)
W
AdWords
W
Marketo
W
Doubleclick
W
HubSpot
W
Twitter
W
Facebook
W
LinkedIn
W
Yahoo! Japan
W
Naver
W
Quantcast
W
Call Tracking
W
Wunderkind
W
ADC Media
W
AgrantSEM
W
Bidtellect
W
Bing
W
G2Crowd
W
NMPI Display
W
VK
W
Adobe Target
W
Google Analytics (Advertising)
W
Trendkite
W
Hotjar
W
6 Sense
W
Terminus
W
StackAdapt
W
The Trade Desk
W
RollWorks
W

Are you sure you want a less customized experience?

We can access your data only if you select "yes" for the categories on the previous screen. This lets us tailor our marketing so that it's more relevant for you. You can change your settings at any time by visiting our privacy statement

Your experience. Your choice.

We care about your privacy. The data we collect helps us understand how you use our products, what information you might be interested in, and what we can improve to make your engagement with Autodesk more rewarding.

May we collect and use your data to tailor your experience?

Explore the benefits of a customized experience by managing your privacy settings for this site or visit our Privacy Statement to learn more about your options.