Shaan Hurley
November already! Hard to believe. Below you will find the schedule of the upcoming Community Conversations. Please note that we will be taking a break after this schedule until January, so stay tuned for another post with that schedule, sometime around the holidays.
Fusion 360 Electronics : Was gibt’s Neues – Oktober Deutsch
Fusion 360 Electronics : What’s New – October German
Wed, Nov 2, 2022 8:00 – 9:00 AM PST
In diesem Webinar werden wir einen Überblick über die neuen Oktober-Updates in Fusion 360 Electronics geben. Gefolgt von einer Frage- und Antwortrunde. Melden Sie sich an, um an dieser Sitzung teilzunehmen.
In this webinar, we will give an overview of the new October updates in Fusion 360 Electronics. Followed by a question and answer session. Register to attend this session.
Session Speakers – Richard Hammerl – Fusion 360 Community Manager Electronics
Session Host – Hazem Adel – Community Manager
Dynamo Office Hours Generative Design From Scratch
Thu, Nov 10, 2022 10:00 – 11:00 AM PST
Now that we’ve explored generative player, and covered the ins and outs of generative design graph authoring, let’s take a look at building a complete generative design graph, starting with nothing more than a blank canvas. No pre-baked graphs. No slides to fall back on. No safety net if things crash. Just Generative Design authoring in action. Number 37 in the popular Dynamo Office Hours series. Register to attend this session.
Session Speakers – Jacob Small & Sol Amour – Autodesk
Session Host – Shaan Hurley – Customer Engagement Manager
Autodesk Docs Office Hours: Power Tips and Your Questions Answered
Thu, Nov 10, 2022 8:00 – 9:00 AM PST
Get your questions answered live, by Autodesk experts. Join us for an informal conversation and maybe a demo or two. Have questions about Autodesk data and document management solutions? Still trying to figure out the difference between BIM 360, Autodesk Docs, and the Autodesk Construction Cloud. Register to attend this session.
Session Speaker – David Smolker – Product Marketing Manager
Session Host – Shaan Hurley – Customer Engagement Manager
3D modeling in Fusion 360 – November 2022
Wed, Nov 16, 2022 10:00 – 11:00 AM PST
Bring your questions on Fusion 360 to Phil Eichmiller. This is a live question-and-answer session about Fusion 360 use and workflows and some tips and news on updates are included. Register to attend this session.
Session Speaker – Phil Eichmiller – Principle Software Engineer
Session Host – Chris Benner – Community Manager PD&M
How to Respond to Changes Faster Using Civil 3D Project Explorer
Thu, Nov 17, 2022 10:00 – 11:00 AM PST
Project Explorer provides a simple user interface inside of Civil 3D software that allows users to respond to changes much more efficiently. We will discuss how to simplify, navigate, and edit your projects much faster. Register to attend this session.
Session Speaker – Todd Rogers – WPM
Session Host – Shaan Hurley – Customer Engagement Manager
Understanding the File Linking Options for Cloud Workshared Revit Models
Thu, Nov 17, 2022 03:00 – 4:00 PM PST
For any Revit project, linking files from the right folder is one of the most important factors in ensuring there are no hiccups in the project delivery. It becomes a lot more confusing on Design Collaboration enabled cloud workshared Revit projects.
This is because there are several folders in which the same model resides, such as the WIP folder, Shared folder, and Consumed folder. So, finding which folder to link from becomes a challenge.
In this presentation, you will learn the Pros and Cons of linking from all these folders. You will also learn about linking non-cloud workshared Revit models for the disciplines that are not using BIM Collaborate Pro in their projects. Register to attend this session.
Session Speaker – Deepak Maini – DDM Designs Australia
Session Host – Wendy Lim – Community Manager AEC
Fusion 360 Ask Me Anything: Electronics Design – November 2022
Wed, Nov 23, 2022 08:00 – 09:00 AM PST
Join Richard Hammerl, a Fusion 360 Community Specialist in Electronics, and Jorge Garcia a Fusion 360 Technical Specialist, Electronics to ask questions on Electronics in Fusion 360 as well as share helpful tips. Register to attend this session.
Session Speakers – Richard Hammerl & Jorge Garcia – Autodesk
Session Host – Chris Benner – Community Manager PD&M
Les cinq questions les plus posées sur Fusion 360 (en français)
The five most asked questions about Fusion 360 (in French)
Wed, Nov 30, 2022 08:00 – 09:00 AM PST
Notre Expert Elite Fabian Perrée vous présente des solutions aux cinq questions les plus fréquentes de notre forum Fusion 360. Inscrivez-vous pour assister à cette session.
Our Elite Expert Fabian Perrée presents solutions to the five most frequently asked questions in our Fusion 360 forum. Register to attend this session.
Session Speaker – Fabian Perée – Exper Elite
Session Host – Patrick Emin – Community Manager
Revit Hints & Hacks with Donnia Tabor-Hanson: What are those Additional Settings
Thu, Dec 8, 2022 08:00 – 09:00 AM PST
We work in Revit and get used to the settings we use daily. How about that list under Additional Settings? Do you know how to set your arrows for dimensions, tags, and notes? Have you ever needed to create a new linetype? Where would you go to find all the Drafting Fill Patterns? Let’s do a run through these Additional Settings for fun.”Revit Hints & Hacks: What are those Additional Settings? Register to attend this session.
Session Speaker – Donnia Tabor-Hanson – Expert Elite
Session Host – Shaan Hurley – Customer Engagement Manager
Dynamo Office Hours Year in Review
Thu, Dec 8, 2022 10:00 – 11:00 AM PST
Come join Jacob and Sol as we wrap up a full year of Dynamo Office Hours! We will review the content covered across 2022 in brief and then have a giant conversation; what did you like most across these sessions? Register to attend this session.
Session Speakers – Jacob Small & Sol Amour – Autodesk
Session Host – Shaan Hurley – Customer Engagement Manager