{"id":330,"date":"2021-10-27T15:07:14","date_gmt":"2021-10-27T22:07:14","guid":{"rendered":"https:\/\/blogs.autodesk.com\/learn-lab\/?p=330"},"modified":"2021-10-29T09:33:48","modified_gmt":"2021-10-29T16:33:48","slug":"high-school-class-saves-district-1-million-using-fusion-360-and-3d-printing","status":"publish","type":"post","link":"https:\/\/blogs.autodesk.com\/learn-lab\/2021\/10\/27\/high-school-class-saves-district-1-million-using-fusion-360-and-3d-printing\/","title":{"rendered":"High School Class Saves District $1 Million using Fusion 360 and 3D Printing"},"content":{"rendered":"\n
\"Cady
Cady Geer\u2019s engineering students collaborating on bushing design<\/figcaption><\/figure>\n\n\n\n

What do you get when you put educators, student engineers, and an HVAC system together? Up to $1 million in savings. This is what the school district in Beaverton, Oregon estimates they will save after engineering students at Sunset High School found a solution to an ongoing issue with their aging HVAC systems.<\/p>\n\n\n\n

Volume modular assemblies within HVAC systems are devices that control airflow into places like classrooms\u2014crucial equipment for the health of students and educators, especially during a pandemic. Systems across Beaverton were finding that the plastic parts that enable airflow, called \u201cbushings,\u201d were eroding and very expensive to replace.<\/p>\n\n\n\n

When Cady Geer, a Career Technical Education (CTE) instructor at Sunset High School, learned about the school district\u2019s dilemma, she trusted her students to do the job. \u201cYou can look at it as a problem that needs a solution, and use the skillset that you\u2019ve learned in your engineering and computer science program to say, \u2018You know what? I can do that\u2019,\u201d says Geer.<\/p>\n\n\n\n

To answer this challenge, Geer\u2019s CTE engineering students used Fusion 360<\/a> to design and 3D print bushings for the school district at 7 cents apiece, a clear bargain from the $1000\/module price tag the district had been facing.<\/p>\n\n\n\n

\"3D
3D printed bushing pieces for Beaverton School District<\/figcaption><\/figure>\n\n\n\n

A Curriculum for Academia & Industry<\/strong><\/h2>\n\n\n\n

To trace back how this feat was achieved, first a little about how Career Technical Education works. CTE programs require educators to either start out as a teacher and gain industry training or the reverse, having an industry background and gaining teacher training. In Geer\u2019s case, she has both teaching and industry experience, making her a powerhouse in the world of high school education.<\/p>\n\n\n\n

Geer\u2019s interest in design and engineering started when she was 10 years old and her dad taught her AutoCAD. She\u2019s been drawn to the process of making things ever since. When Geer arrived at Sunset High school in 2013 and noticed there was no engineering program in the curriculum, she made it a personal goal to establish one.<\/p>\n\n\n\n

Geer and her coworker Jason Galbraith went after a CTE revitalization grant, securing a third of a million dollars to begin an engineering program<\/a> at the school. And what they developed is no regular engineering program. Geer and her peers meticulously built their own curriculum, doing field research with local engineering firms to determine which skills would be most important for their graduating students.<\/p>\n\n\n\n

Geer envisioned that these same firms might hire her students and reworked Sunset High\u2019s curriculum to prepare students for future careers. Skills taught include 3D modeling, circuitry, mechatronics, project management, and team collaboration\u2014using Autodesk Fusion 360<\/a>, Autodesk Tinkercad<\/a>, and Instructables<\/a>. Students collaborate remotely and in-person on design challenges like the HVAC system project. Sunset High School currently offers 20 classes between the computer science and engineering programs.<\/p>\n\n\n\n

Remote Learning and Collaboration<\/strong><\/h2>\n\n\n\n

At Sunset High School, computer-aided design (CAD) is taught in three levels, each lasting a semester. Foundational principles in 2D modeling are covered first, then students move on to more complex 3D projects. Geer chose Fusion 360 for its easy-to-learn functionality and cloud-based collaboration. Most of her students join the engineering program with zero background in 2D or 3D modeling, but are able to learn Fusion 360 functionality quickly. This gives them more time to focus on the art of engineering, rather than the tedium of software learning.<\/p>\n\n\n\n

The CAD-specific classes are taught by her coworker and husband Matt Geer. He has successfully implemented projects such as the \u201cBe Useful\u201d project, where students design and engineer a product that can be used in real life. Managing the complexities of pandemic learning, students have been able to work and collaborate remotely, with access to their design work and the classroom setting. A win-win for Sunset High School.<\/p>\n\n\n\n

\u201cThe ability to import my entire classroom to access Fusion 360 is a game-changer. It used to take two weeks to get a whole class set up and sharing correctly. This year, that dwindled down to one day. The gift of time is phenomenal.\u201d \u2013 Cady Geer, CTE instructor at Sunset High School<\/em><\/p>\n\n\n\n

\"Cady
Cady Geer\u2019s engineering student working with 3D printer<\/figcaption><\/figure>\n\n\n\n

Cady Geer\u2019s passion for improving educational experiences is palpable. She understands how deeply nuanced learning is for every individual and seeks to address the gap between conventional curricula and unconventional learning styles with experiential, hands-on activities. Her students continue to 3D print bushing parts for maintenance crews to install across the Beaverton school district. Reportedly, her students can engineer these parts faster than the crew can install them\u2014a sign of true success for this bright group of blossoming engineers.<\/p>\n\n\n\n

Are you a CTE teacher? If so, what kind of projects do your students work on? Let us know in the comments!<\/em><\/p>\n","protected":false},"excerpt":{"rendered":"

What do you get when you put educators, student engineers, and an HVAC system together? Up to $1 million in savings. This is what the school district in Beaverton, Oregon estimates they will save after engineering students at Sunset High School found a solution to an ongoing issue with their aging HVAC systems. Volume modular […]<\/p>\n","protected":false},"author":64095,"featured_media":335,"menu_order":0,"comment_status":"open","ping_status":"open","sticky":false,"template":"","format":"standard","meta":{"_acf_changed":false,"inline_featured_image":false,"footnotes":""},"categories":[16],"tags":[51,59,60,28,56,30,22,54],"class_list":["post-330","post","type-post","status-publish","format-standard","has-post-thumbnail","hentry","category-academic-leaders","tag-3d-printing","tag-career-technical-education","tag-cte","tag-design","tag-educators","tag-engineering","tag-fusion-360","tag-students","dhig-theme--light"],"acf":[],"yoast_head":"\nHigh School Class Saves District $1 Million using Fusion 360 and 3D Printing - Autodesk Learn Lab<\/title>\n<meta name=\"description\" content=\"See how high-school engineering students used Fusion 360 and 3D printing to save the Beaverton, Oregon school district almost $1 million.\" \/>\n<meta name=\"robots\" content=\"index, follow, max-snippet:-1, max-image-preview:large, max-video-preview:-1\" \/>\n<link rel=\"canonical\" href=\"https:\/\/blogs.autodesk.com\/learn-lab\/2021\/10\/27\/high-school-class-saves-district-1-million-using-fusion-360-and-3d-printing\/\" \/>\n<meta property=\"og:locale\" content=\"en_US\" \/>\n<meta property=\"og:type\" content=\"article\" \/>\n<meta property=\"og:title\" content=\"High School Class Saves District $1 Million using Fusion 360 and 3D Printing - Autodesk Learn Lab\" \/>\n<meta property=\"og:description\" content=\"See how high-school engineering students used Fusion 360 and 3D printing to save the Beaverton, Oregon school district almost $1 million.\" \/>\n<meta property=\"og:url\" content=\"https:\/\/blogs.autodesk.com\/learn-lab\/2021\/10\/27\/high-school-class-saves-district-1-million-using-fusion-360-and-3d-printing\/\" \/>\n<meta property=\"og:site_name\" content=\"Autodesk Learn Lab\" \/>\n<meta property=\"article:published_time\" content=\"2021-10-27T22:07:14+00:00\" \/>\n<meta property=\"article:modified_time\" content=\"2021-10-29T16:33:48+00:00\" \/>\n<meta property=\"og:image\" content=\"https:\/\/blogs.autodesk.com\/learn-lab\/wp-content\/uploads\/sites\/156\/20211022_134549.jpg\" \/>\n\t<meta property=\"og:image:width\" content=\"1920\" \/>\n\t<meta property=\"og:image:height\" content=\"1513\" \/>\n\t<meta property=\"og:image:type\" content=\"image\/jpeg\" \/>\n<meta name=\"author\" content=\"Sarah Fisher\" \/>\n<meta name=\"twitter:card\" content=\"summary_large_image\" \/>\n<meta name=\"twitter:label1\" content=\"Written by\" \/>\n\t<meta name=\"twitter:data1\" content=\"Sarah Fisher\" \/>\n\t<meta name=\"twitter:label2\" content=\"Est. reading time\" \/>\n\t<meta name=\"twitter:data2\" content=\"5 minutes\" \/>\n<script type=\"application\/ld+json\" class=\"yoast-schema-graph\">{\"@context\":\"https:\\\/\\\/schema.org\",\"@graph\":[{\"@type\":\"Article\",\"@id\":\"https:\\\/\\\/blogs.autodesk.com\\\/learn-lab\\\/2021\\\/10\\\/27\\\/high-school-class-saves-district-1-million-using-fusion-360-and-3d-printing\\\/#article\",\"isPartOf\":{\"@id\":\"https:\\\/\\\/blogs.autodesk.com\\\/learn-lab\\\/2021\\\/10\\\/27\\\/high-school-class-saves-district-1-million-using-fusion-360-and-3d-printing\\\/\"},\"author\":{\"name\":\"Sarah Fisher\",\"@id\":\"https:\\\/\\\/blogs.autodesk.com\\\/learn-lab\\\/#\\\/schema\\\/person\\\/fb1526e879719000c0335d28e4765b78\"},\"headline\":\"High School Class Saves District $1 Million using Fusion 360 and 3D Printing\",\"datePublished\":\"2021-10-27T22:07:14+00:00\",\"dateModified\":\"2021-10-29T16:33:48+00:00\",\"mainEntityOfPage\":{\"@id\":\"https:\\\/\\\/blogs.autodesk.com\\\/learn-lab\\\/2021\\\/10\\\/27\\\/high-school-class-saves-district-1-million-using-fusion-360-and-3d-printing\\\/\"},\"wordCount\":813,\"commentCount\":0,\"publisher\":{\"@id\":\"https:\\\/\\\/blogs.autodesk.com\\\/learn-lab\\\/#organization\"},\"image\":{\"@id\":\"https:\\\/\\\/blogs.autodesk.com\\\/learn-lab\\\/2021\\\/10\\\/27\\\/high-school-class-saves-district-1-million-using-fusion-360-and-3d-printing\\\/#primaryimage\"},\"thumbnailUrl\":\"https:\\\/\\\/blogs.autodesk.com\\\/learn-lab\\\/wp-content\\\/uploads\\\/sites\\\/156\\\/20211022_134549.jpg\",\"keywords\":[\"3D printing\",\"Career Technical Education\",\"CTE\",\"design\",\"educators\",\"engineering\",\"Fusion 360\",\"students\"],\"articleSection\":[\"Academic Leaders\"],\"inLanguage\":\"en-US\",\"potentialAction\":[{\"@type\":\"CommentAction\",\"name\":\"Comment\",\"target\":[\"https:\\\/\\\/blogs.autodesk.com\\\/learn-lab\\\/2021\\\/10\\\/27\\\/high-school-class-saves-district-1-million-using-fusion-360-and-3d-printing\\\/#respond\"]}]},{\"@type\":\"WebPage\",\"@id\":\"https:\\\/\\\/blogs.autodesk.com\\\/learn-lab\\\/2021\\\/10\\\/27\\\/high-school-class-saves-district-1-million-using-fusion-360-and-3d-printing\\\/\",\"url\":\"https:\\\/\\\/blogs.autodesk.com\\\/learn-lab\\\/2021\\\/10\\\/27\\\/high-school-class-saves-district-1-million-using-fusion-360-and-3d-printing\\\/\",\"name\":\"High School Class Saves District $1 Million using Fusion 360 and 3D Printing - Autodesk Learn Lab\",\"isPartOf\":{\"@id\":\"https:\\\/\\\/blogs.autodesk.com\\\/learn-lab\\\/#website\"},\"primaryImageOfPage\":{\"@id\":\"https:\\\/\\\/blogs.autodesk.com\\\/learn-lab\\\/2021\\\/10\\\/27\\\/high-school-class-saves-district-1-million-using-fusion-360-and-3d-printing\\\/#primaryimage\"},\"image\":{\"@id\":\"https:\\\/\\\/blogs.autodesk.com\\\/learn-lab\\\/2021\\\/10\\\/27\\\/high-school-class-saves-district-1-million-using-fusion-360-and-3d-printing\\\/#primaryimage\"},\"thumbnailUrl\":\"https:\\\/\\\/blogs.autodesk.com\\\/learn-lab\\\/wp-content\\\/uploads\\\/sites\\\/156\\\/20211022_134549.jpg\",\"datePublished\":\"2021-10-27T22:07:14+00:00\",\"dateModified\":\"2021-10-29T16:33:48+00:00\",\"description\":\"See how high-school engineering students used Fusion 360 and 3D printing to save the Beaverton, Oregon school district almost $1 million.\",\"breadcrumb\":{\"@id\":\"https:\\\/\\\/blogs.autodesk.com\\\/learn-lab\\\/2021\\\/10\\\/27\\\/high-school-class-saves-district-1-million-using-fusion-360-and-3d-printing\\\/#breadcrumb\"},\"inLanguage\":\"en-US\",\"potentialAction\":[{\"@type\":\"ReadAction\",\"target\":[\"https:\\\/\\\/blogs.autodesk.com\\\/learn-lab\\\/2021\\\/10\\\/27\\\/high-school-class-saves-district-1-million-using-fusion-360-and-3d-printing\\\/\"]}]},{\"@type\":\"ImageObject\",\"inLanguage\":\"en-US\",\"@id\":\"https:\\\/\\\/blogs.autodesk.com\\\/learn-lab\\\/2021\\\/10\\\/27\\\/high-school-class-saves-district-1-million-using-fusion-360-and-3d-printing\\\/#primaryimage\",\"url\":\"https:\\\/\\\/blogs.autodesk.com\\\/learn-lab\\\/wp-content\\\/uploads\\\/sites\\\/156\\\/20211022_134549.jpg\",\"contentUrl\":\"https:\\\/\\\/blogs.autodesk.com\\\/learn-lab\\\/wp-content\\\/uploads\\\/sites\\\/156\\\/20211022_134549.jpg\",\"width\":1920,\"height\":1513,\"caption\":\"Cady Geer\u2019s engineering student working with 3D printer\"},{\"@type\":\"BreadcrumbList\",\"@id\":\"https:\\\/\\\/blogs.autodesk.com\\\/learn-lab\\\/2021\\\/10\\\/27\\\/high-school-class-saves-district-1-million-using-fusion-360-and-3d-printing\\\/#breadcrumb\",\"itemListElement\":[{\"@type\":\"ListItem\",\"position\":1,\"name\":\"Home\",\"item\":\"https:\\\/\\\/blogs.autodesk.com\\\/learn-lab\\\/\"},{\"@type\":\"ListItem\",\"position\":2,\"name\":\"High School Class Saves District $1 Million using Fusion 360 and 3D Printing\"}]},{\"@type\":\"WebSite\",\"@id\":\"https:\\\/\\\/blogs.autodesk.com\\\/learn-lab\\\/#website\",\"url\":\"https:\\\/\\\/blogs.autodesk.com\\\/learn-lab\\\/\",\"name\":\"Autodesk Learn Lab\",\"description\":\"Perspectives on preparing students and lifelong learners for workforce readiness, career success, and creating the new possible.\",\"publisher\":{\"@id\":\"https:\\\/\\\/blogs.autodesk.com\\\/learn-lab\\\/#organization\"},\"potentialAction\":[{\"@type\":\"SearchAction\",\"target\":{\"@type\":\"EntryPoint\",\"urlTemplate\":\"https:\\\/\\\/blogs.autodesk.com\\\/learn-lab\\\/?s={search_term_string}\"},\"query-input\":{\"@type\":\"PropertyValueSpecification\",\"valueRequired\":true,\"valueName\":\"search_term_string\"}}],\"inLanguage\":\"en-US\"},{\"@type\":\"Organization\",\"@id\":\"https:\\\/\\\/blogs.autodesk.com\\\/learn-lab\\\/#organization\",\"name\":\"Autodesk Learn Lab\",\"url\":\"https:\\\/\\\/blogs.autodesk.com\\\/learn-lab\\\/\",\"logo\":{\"@type\":\"ImageObject\",\"inLanguage\":\"en-US\",\"@id\":\"https:\\\/\\\/blogs.autodesk.com\\\/learn-lab\\\/#\\\/schema\\\/logo\\\/image\\\/\",\"url\":\"https:\\\/\\\/blogs.autodesk.com\\\/learn-lab\\\/wp-content\\\/uploads\\\/sites\\\/156\\\/adk-favicon-1.png\",\"contentUrl\":\"https:\\\/\\\/blogs.autodesk.com\\\/learn-lab\\\/wp-content\\\/uploads\\\/sites\\\/156\\\/adk-favicon-1.png\",\"width\":64,\"height\":64,\"caption\":\"Autodesk Learn Lab\"},\"image\":{\"@id\":\"https:\\\/\\\/blogs.autodesk.com\\\/learn-lab\\\/#\\\/schema\\\/logo\\\/image\\\/\"}},{\"@type\":\"Person\",\"@id\":\"https:\\\/\\\/blogs.autodesk.com\\\/learn-lab\\\/#\\\/schema\\\/person\\\/fb1526e879719000c0335d28e4765b78\",\"name\":\"Sarah Fisher\",\"image\":{\"@type\":\"ImageObject\",\"inLanguage\":\"en-US\",\"@id\":\"https:\\\/\\\/blogs.autodesk.com\\\/learn-lab\\\/wp-content\\\/uploads\\\/sites\\\/156\\\/adk-426-learn-lab-sara-fisher-150x150.jpeg\",\"url\":\"https:\\\/\\\/blogs.autodesk.com\\\/learn-lab\\\/wp-content\\\/uploads\\\/sites\\\/156\\\/adk-426-learn-lab-sara-fisher-150x150.jpeg\",\"contentUrl\":\"https:\\\/\\\/blogs.autodesk.com\\\/learn-lab\\\/wp-content\\\/uploads\\\/sites\\\/156\\\/adk-426-learn-lab-sara-fisher-150x150.jpeg\",\"caption\":\"Sarah Fisher\"},\"description\":\"Autodesk Education Content Writer\",\"url\":\"https:\\\/\\\/blogs.autodesk.com\\\/learn-lab\\\/author\\\/sarahfisher\\\/\"}]}<\/script>\n<!-- \/ Yoast SEO plugin. -->","yoast_head_json":{"title":"High School Class Saves District $1 Million using Fusion 360 and 3D Printing - Autodesk Learn Lab","description":"See how high-school engineering students used Fusion 360 and 3D printing to save the Beaverton, Oregon school district almost $1 million.","robots":{"index":"index","follow":"follow","max-snippet":"max-snippet:-1","max-image-preview":"max-image-preview:large","max-video-preview":"max-video-preview:-1"},"canonical":"https:\/\/blogs.autodesk.com\/learn-lab\/2021\/10\/27\/high-school-class-saves-district-1-million-using-fusion-360-and-3d-printing\/","og_locale":"en_US","og_type":"article","og_title":"High School Class Saves District $1 Million using Fusion 360 and 3D Printing - Autodesk Learn Lab","og_description":"See how high-school engineering students used Fusion 360 and 3D printing to save the Beaverton, Oregon school district almost $1 million.","og_url":"https:\/\/blogs.autodesk.com\/learn-lab\/2021\/10\/27\/high-school-class-saves-district-1-million-using-fusion-360-and-3d-printing\/","og_site_name":"Autodesk Learn Lab","article_published_time":"2021-10-27T22:07:14+00:00","article_modified_time":"2021-10-29T16:33:48+00:00","og_image":[{"width":1920,"height":1513,"url":"https:\/\/blogs.autodesk.com\/learn-lab\/wp-content\/uploads\/sites\/156\/20211022_134549.jpg","type":"image\/jpeg"}],"author":"Sarah Fisher","twitter_card":"summary_large_image","twitter_misc":{"Written by":"Sarah Fisher","Est. reading time":"5 minutes"},"schema":{"@context":"https:\/\/schema.org","@graph":[{"@type":"Article","@id":"https:\/\/blogs.autodesk.com\/learn-lab\/2021\/10\/27\/high-school-class-saves-district-1-million-using-fusion-360-and-3d-printing\/#article","isPartOf":{"@id":"https:\/\/blogs.autodesk.com\/learn-lab\/2021\/10\/27\/high-school-class-saves-district-1-million-using-fusion-360-and-3d-printing\/"},"author":{"name":"Sarah Fisher","@id":"https:\/\/blogs.autodesk.com\/learn-lab\/#\/schema\/person\/fb1526e879719000c0335d28e4765b78"},"headline":"High School Class Saves District $1 Million using Fusion 360 and 3D Printing","datePublished":"2021-10-27T22:07:14+00:00","dateModified":"2021-10-29T16:33:48+00:00","mainEntityOfPage":{"@id":"https:\/\/blogs.autodesk.com\/learn-lab\/2021\/10\/27\/high-school-class-saves-district-1-million-using-fusion-360-and-3d-printing\/"},"wordCount":813,"commentCount":0,"publisher":{"@id":"https:\/\/blogs.autodesk.com\/learn-lab\/#organization"},"image":{"@id":"https:\/\/blogs.autodesk.com\/learn-lab\/2021\/10\/27\/high-school-class-saves-district-1-million-using-fusion-360-and-3d-printing\/#primaryimage"},"thumbnailUrl":"https:\/\/blogs.autodesk.com\/learn-lab\/wp-content\/uploads\/sites\/156\/20211022_134549.jpg","keywords":["3D printing","Career Technical Education","CTE","design","educators","engineering","Fusion 360","students"],"articleSection":["Academic Leaders"],"inLanguage":"en-US","potentialAction":[{"@type":"CommentAction","name":"Comment","target":["https:\/\/blogs.autodesk.com\/learn-lab\/2021\/10\/27\/high-school-class-saves-district-1-million-using-fusion-360-and-3d-printing\/#respond"]}]},{"@type":"WebPage","@id":"https:\/\/blogs.autodesk.com\/learn-lab\/2021\/10\/27\/high-school-class-saves-district-1-million-using-fusion-360-and-3d-printing\/","url":"https:\/\/blogs.autodesk.com\/learn-lab\/2021\/10\/27\/high-school-class-saves-district-1-million-using-fusion-360-and-3d-printing\/","name":"High School Class Saves District $1 Million using Fusion 360 and 3D Printing - Autodesk Learn Lab","isPartOf":{"@id":"https:\/\/blogs.autodesk.com\/learn-lab\/#website"},"primaryImageOfPage":{"@id":"https:\/\/blogs.autodesk.com\/learn-lab\/2021\/10\/27\/high-school-class-saves-district-1-million-using-fusion-360-and-3d-printing\/#primaryimage"},"image":{"@id":"https:\/\/blogs.autodesk.com\/learn-lab\/2021\/10\/27\/high-school-class-saves-district-1-million-using-fusion-360-and-3d-printing\/#primaryimage"},"thumbnailUrl":"https:\/\/blogs.autodesk.com\/learn-lab\/wp-content\/uploads\/sites\/156\/20211022_134549.jpg","datePublished":"2021-10-27T22:07:14+00:00","dateModified":"2021-10-29T16:33:48+00:00","description":"See how high-school engineering students used Fusion 360 and 3D printing to save the Beaverton, Oregon school district almost $1 million.","breadcrumb":{"@id":"https:\/\/blogs.autodesk.com\/learn-lab\/2021\/10\/27\/high-school-class-saves-district-1-million-using-fusion-360-and-3d-printing\/#breadcrumb"},"inLanguage":"en-US","potentialAction":[{"@type":"ReadAction","target":["https:\/\/blogs.autodesk.com\/learn-lab\/2021\/10\/27\/high-school-class-saves-district-1-million-using-fusion-360-and-3d-printing\/"]}]},{"@type":"ImageObject","inLanguage":"en-US","@id":"https:\/\/blogs.autodesk.com\/learn-lab\/2021\/10\/27\/high-school-class-saves-district-1-million-using-fusion-360-and-3d-printing\/#primaryimage","url":"https:\/\/blogs.autodesk.com\/learn-lab\/wp-content\/uploads\/sites\/156\/20211022_134549.jpg","contentUrl":"https:\/\/blogs.autodesk.com\/learn-lab\/wp-content\/uploads\/sites\/156\/20211022_134549.jpg","width":1920,"height":1513,"caption":"Cady Geer\u2019s engineering student working with 3D printer"},{"@type":"BreadcrumbList","@id":"https:\/\/blogs.autodesk.com\/learn-lab\/2021\/10\/27\/high-school-class-saves-district-1-million-using-fusion-360-and-3d-printing\/#breadcrumb","itemListElement":[{"@type":"ListItem","position":1,"name":"Home","item":"https:\/\/blogs.autodesk.com\/learn-lab\/"},{"@type":"ListItem","position":2,"name":"High School Class Saves District $1 Million using Fusion 360 and 3D Printing"}]},{"@type":"WebSite","@id":"https:\/\/blogs.autodesk.com\/learn-lab\/#website","url":"https:\/\/blogs.autodesk.com\/learn-lab\/","name":"Autodesk Learn Lab","description":"Perspectives on preparing students and lifelong learners for workforce readiness, career success, and creating the new possible.","publisher":{"@id":"https:\/\/blogs.autodesk.com\/learn-lab\/#organization"},"potentialAction":[{"@type":"SearchAction","target":{"@type":"EntryPoint","urlTemplate":"https:\/\/blogs.autodesk.com\/learn-lab\/?s={search_term_string}"},"query-input":{"@type":"PropertyValueSpecification","valueRequired":true,"valueName":"search_term_string"}}],"inLanguage":"en-US"},{"@type":"Organization","@id":"https:\/\/blogs.autodesk.com\/learn-lab\/#organization","name":"Autodesk Learn Lab","url":"https:\/\/blogs.autodesk.com\/learn-lab\/","logo":{"@type":"ImageObject","inLanguage":"en-US","@id":"https:\/\/blogs.autodesk.com\/learn-lab\/#\/schema\/logo\/image\/","url":"https:\/\/blogs.autodesk.com\/learn-lab\/wp-content\/uploads\/sites\/156\/adk-favicon-1.png","contentUrl":"https:\/\/blogs.autodesk.com\/learn-lab\/wp-content\/uploads\/sites\/156\/adk-favicon-1.png","width":64,"height":64,"caption":"Autodesk Learn Lab"},"image":{"@id":"https:\/\/blogs.autodesk.com\/learn-lab\/#\/schema\/logo\/image\/"}},{"@type":"Person","@id":"https:\/\/blogs.autodesk.com\/learn-lab\/#\/schema\/person\/fb1526e879719000c0335d28e4765b78","name":"Sarah Fisher","image":{"@type":"ImageObject","inLanguage":"en-US","@id":"https:\/\/blogs.autodesk.com\/learn-lab\/wp-content\/uploads\/sites\/156\/adk-426-learn-lab-sara-fisher-150x150.jpeg","url":"https:\/\/blogs.autodesk.com\/learn-lab\/wp-content\/uploads\/sites\/156\/adk-426-learn-lab-sara-fisher-150x150.jpeg","contentUrl":"https:\/\/blogs.autodesk.com\/learn-lab\/wp-content\/uploads\/sites\/156\/adk-426-learn-lab-sara-fisher-150x150.jpeg","caption":"Sarah Fisher"},"description":"Autodesk Education Content Writer","url":"https:\/\/blogs.autodesk.com\/learn-lab\/author\/sarahfisher\/"}]}},"_links":{"self":[{"href":"https:\/\/blogs.autodesk.com\/learn-lab\/wp-json\/wp\/v2\/posts\/330","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/blogs.autodesk.com\/learn-lab\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/blogs.autodesk.com\/learn-lab\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/blogs.autodesk.com\/learn-lab\/wp-json\/wp\/v2\/users\/64095"}],"replies":[{"embeddable":true,"href":"https:\/\/blogs.autodesk.com\/learn-lab\/wp-json\/wp\/v2\/comments?post=330"}],"version-history":[{"count":0,"href":"https:\/\/blogs.autodesk.com\/learn-lab\/wp-json\/wp\/v2\/posts\/330\/revisions"}],"wp:featuredmedia":[{"embeddable":true,"href":"https:\/\/blogs.autodesk.com\/learn-lab\/wp-json\/wp\/v2\/media\/335"}],"wp:attachment":[{"href":"https:\/\/blogs.autodesk.com\/learn-lab\/wp-json\/wp\/v2\/media?parent=330"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/blogs.autodesk.com\/learn-lab\/wp-json\/wp\/v2\/categories?post=330"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/blogs.autodesk.com\/learn-lab\/wp-json\/wp\/v2\/tags?post=330"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}